|
|
ECEN3250 Circuits/Electronics 3, Fall 2009Introduction to Microelectronic Circuits |
|
Required Textbook:
Sedra/Smith, Microelectronic Circuits, Oxford University Press, Fifth Edition.Recommended: Spice, 2nd Edition, G. Roberts, A. Sedra, Oxford, 1997
3.1 The Ideal Diode
3.2 Terminal Characteristics of Junction Diodes
3.3 Modeling the Diode Forward Characteristic
3.4 Operation in the Reverse Breakdown Region-Zener Diodes
3.5 Rectifier Circuits
3.6 Limiting and Clamping Circuits
3.7 Physical Operation of Diodes
3.9 The SPICE Diode Model and Simulation Examples
4.1 Device Structure and Physical Operation
4.2 Current-Voltage Characteristics
4.3 MOSFET Circuits at DC
4.4 The MOSFET as an Amplifier and as a Switch
4.5 Biasing in MOS Amplifier Circuits
4.6 Small-signal Operation and Models
4.7 Single-Stage MOS Amplifiers
4.8 The MOSFET Internal Capacitances and High-Frequency Model
4.10 The CMOS Digital Logic Inverter
4.12 The SPICE MOSFET Model and Simulation Examples
5.1 Device Structure and Physical Operation
5.2 Current-Voltage Characteristics
5.3 The BJT as an Amplifier and as a Switch
5.4 BJT Circuits at DC
5.5 Biasing in BJT Amplifier Circuits
5.6 Small-Signal Operation and Models
5.7 Single-Stage BJT Amplifiers
5.8 The BJT Internal Capacitances and High-Frequency Model
5.11 The SPICE BJT Model and Simulation Examples
6.1 IC Design Philosophy
6.2 Comparison of the MOSFET and the BJT
6.3 IC Biasing - Current Sources, Current Mirrors, and Current-Steering Circuits
6.5 The Common-Source and Common-Emitter Amplifiers with Active Loads
6.7 The Common-Gate and Common-Base Amplifiers with Active Loads
6.10 Source and Emitter Followers
7.1 The MOS Differential Pair
7.2 Small-Signal Operation of the MOS Differential Amplifier
7.5 The Differential Amplifier with Active Load
10.1 Digital Circuit Design: An Overview
10.2 Design and Performance Analysis of the CMOS Inverter
10.3 CMOS Logic-Gate Circuits