ECEN4618: Archive

• Component data sheets
• Experiment #0 (how to write lab reports)
• PSpice material
• Standard 5% resistance and capacitance values
• Old exams
• Lecture notes
• Syllabus and lab handouts
• ECEN4618 home page
• Instructor information

• 555 Timer
• LF351 operational amplifier, similar to LF356
• ZVN3310A, ZVP3310A, discrete MOSFETs
• LF353 dual operational amplifier
• LM311 voltage comparator
• DAC0808 8-bit D/A converter
• CD4093 Quad 2-input NAND Schmitt Trigger
• LM324 Quad operational amplifier
• CD4046 Phase Locked Loop

• A full Windows 95 version of PSpice, which includes a schematics editor, can be retrieved from ftp://ftp.microsim.com/
• For the latest PSpice products for Windows 95 and NT systems, go to http://orcad.com/products/pspice/eval_f.htm .
• Here's a link to get Winzip 95 or Winzip 3.1 - Needed to extract .zip files in Windows 95/NT or Windows V.3.1.
• DOS version 6.0 of PSpice can be found at  http://arago.eecs.uic.edu/EECS342/download.htm . To print results from Probe, setup hardcopy for PostScript output and the appropriate parallel port. Work from a DOS prompt.
• For both DOS v. 6.1 and Windows v. 6.2, go to  http://www.uow.edu.au/pwrsysed/elec101/code_hin.htm
• If you use the DOS version of PSpice, you can use the library 4618.lib of component models (this is a text file, save it as 4618.lib), which contains:
• LM311 voltage comparator (subcircuit). Usage: Xname in+ in- vcc vee out gnd LM311
• LF356 operational amplifier (subcircuit). Usage: Xname in+ in- vcc vee out LF356
• LM324 operational amplifier (subcircuit). Usage: Xname in+ in- vcc vee out LM324
• 555 timer (subcircuit). Usage: Xname gnd trigger out reset control threshold discharge vcc 555
• an NMOS transistor. Usage: Mname drain gate source source NMOSFET
• a PMOS transistor. Usage: Mname drain gate source source PMOSFET
• an NPN bipolar transistor. Usage: Qname collector base emitter Q2N3904
• a PNP bipolar transistor. Usage: Qname collector base emitter Q2N3906
• If you use the Windows version of PSpice, you need to include the library 4618.lib in the list of libraries.
• lab0.cir Example circuit file with the 555 timer (text file lab0.cir)
• A short manual for Spice can be found at the University of Pennsylvania..

 

 
 
 

---

Standard resistance and capacitance values (5% tolerance)
 

10	16	27	43	68
11	18	30	47	75
12	20	33	51	82
13	22	36	56	91
15	24	39	62	100

Each resistance value in the table is available multipled by:
 

0.1 Ohm

1 Ohm

10 Ohm

100 Ohm

1 KOhm

10 KOhm

100 KOhm

Each capacitance value in the table is available multiplied by:
 

0.1pF

1pF

10pF

100pF

1nF

10nF

100nF

1uF

10uF

---



Selected Lecture Notes from Spring '99
•  10X voltage probes
•  FSK Modem Model


Lecture Notes from Fall '98:

•  September 4, 1998
• September 11, 1998
• September 18, 1998
• October 2, 1998
• October 9, 1998
• Midterm Exam solutions
• November 13, 1998
Lecture Notes and selected handouts from Spring '98:
•   lab 6
•  lab 5
•  lab 5 day 1
•  lab 5 day 2
•  lab 4 handout
•  lab 4
•  lab 3 handout
•  lab 3 parts 3&4
•  lab 3
•  lab 2
•  lab 1

---

Old Exams
• Spring 96 test.
• Fall 96 test. Solution (gif).

---

Instructor information

• Dragan Maksimovic: ECOT243, Tel: 492-4863, maksimov@colorado.edu
• Steve Hoskins: ECEE 1B61C (in the power lab), Tel: 492-1661, email to hoskinss@ucsub.colorado.edu